5 Reasons to Add an Outdoor TV into Your Remodel

A backyard remodel is the single best moment to add an outdoor TV, and the most common moment to forget it.

Electrical, data, and structural support are all open during construction. Once the patio is poured, the masonry is laid, and the finish work is done, adding them means cutting through what you just paid to build.

Here are five reasons to design the display into the remodel from the start.

1. Power and Data Run Clean Behind the Walls

An outdoor LED display needs dedicated power and a data path to the media source. During a remodel those runs go behind finished surfaces, invisible and code-compliant. Afterward, you are left with surface-mounted conduit or trenching across hardscape.

2. Structural Mounting Is Engineered Once

A large-format display carries real weight and wind load. Framing the mount into the structure during construction means the mount is rated, the wall is reinforced, and the install is permanent, not bolted into an afterthought.

3. A Subterranean Vault Needs to Be Planned, Not Dug Later

For premium installs, a subterranean vault houses the power supplies and controllers below grade, away from heat and tampering. A vault is straightforward to pour during a remodel and destructive to add afterward.

Heat kills electronics faster than water does. A vault solves both by keeping the brains of the system thermally stable and weather-sealed.

4. The Display Becomes the Design Centerpiece, Not an Add-On

When the screen is part of the plan, sightlines, seating, and lighting are designed around it. The display reads as architecture, not as a television bolted to a finished wall.

5. It Is Dramatically Cheaper to Do It Once

Retrofitting power, data, structural reinforcement, and weather-sealed access into a finished space routinely costs more than installing the display itself. Planning the display into the remodel consolidates every one of those costs into the original construction.

YOLO TV outdoor displays are engineered specifically for demanding outdoor environments. Our standard outdoor systems deliver approximately 6,000 nits of brightness, with configurations available from 4,000 to 7,000 nits based on the application. Recommended brightness depends on factors such as screen orientation, direct sun exposure, viewing time, pixel pitch, geographic location, and intended use.

Outdoor systems are available with IP65–IP68 ingress-protection ratings, depending on the specific display configuration and installation environment. Ingress-protection requirements can vary based on cabinet and module construction, system configuration, installation environment, and the level of weather protection required.

Every YOLO TV residential display is backed by our industry-leading 5-Year Peace of Mind Parts Warranty. Covered YOLO TV components are protected for five years, and because our LED systems are modular, many parts can be replaced individually without replacing the entire display. On-site service, technician travel, shipping, and third-party labor may be separate unless specifically included in your agreement.

Plan the Screen Before You Pour the Concrete

If your remodel is underway, the cheapest path to a permanent outdoor entertainment space is to specify the display now, power, data, mount, and vault, and let the construction absorb the infrastructure. The alternative is paying twice to build the same wall.